Thursday, March 19, 2015

Gluing the deck to the hull

Finally gluing the deck to the hull. Time is slipping away. The big boat show is in eight weeks and I still have lots of sanding and varnishing to do.

Thursday, February 26, 2015

Cutting out the hatches

Cutting out the hatch plates for the kayak. It takes time to build enough courage to start cutting. I hate the idea of cutting holes in a good looking kayak.



Sunday, January 18, 2015

Glassing the deck



Today I put the fiberglass cloth on the deck of the Petrel. Once the cloth is soaked with epoxy resin it turns clear to show the wood grain underneath.

Thursday, January 1, 2015

First glass



Today is a big day for the Petrel build. I just put the first area of fiberglass cloth down with epoxy resin. This starts a process that will take me until spring.  


Sunday, November 30, 2014

Sunday, November 30, 2014

This is the first post in three years. I stopped working on this kayak when Dad got sick. I had no time with Dad in hospice and after he passed away I had no wind in my sails. I spent the next two years working at a new job as plant manager at a wheelchair company. This job left me too tired and depressed to work on my time off so the Petrel build just sat for three years. I quit that job last March I now I am back to being myself again.


This week I started working again on the Petrel. It felt so good to be working with my hands again.

Sunday, December 18, 2011

Deck layout

To lay out the deck pattern, I used 1/4 x 1/4 strips in different colors to outline the pattern. I used a hot glue gun to glue the strips to the forms.


Once I have an outline to work to, I can start laying strips. These strips do not get glued to the forms at all. I just glue the strips to each other.


If you click on the photo to enlarge it, you will see the fancy grain in the wood. This is Lace wood from Africa. It is very light weight and very easy to work with. Once it is sanded and glassed, the grain will really stand out.





Cockpit recess

I made the cockpit recess by lofting a template from Nick Schade's book. I glued wood strips over the template. After the glue dried, I sanded the wood smooth. Then I put down one layer of 6 oz. glass cloth.


After trimming the outside of the recess to the template, I set the recess in place so that I could lay out my deck pattern.